Yuantai (Zhangjiagang) Machinery Technology Co., Ltd
Add to Cart
CNC32UE Tube bender
Tube bending machine has both left and right bending functions, for the individual tube bending machine will interfere with the workpiece, this machine can be completed in one time; CNC8 axis is servo independent controlled, all actions can be accurately adjusted in the touch screen, the accuracy is very high. The model has the function of setting mandrel pulling in advance and mandrel automatic lubrication system.
| Max bending capacity (carbon steel as example) | mm | 20*1.5 | 25*1.5 | 38*1.5 |
| Max bending Radius | mm | 70 | 150 | 200 |
| Max Bending degree | degree | 190 | 195 | 195 |
| clamping distance | mm | 40 | 100 | |
| material Feeding precision | mm | 0.1 | 0.1 | 0.1 |
| Tube bending precision | degree | 0.1 | 0.1 | 0.1 |
| Rotate precision | deg/sec | 0.1 | 0.1 | 0.1 |
| Tube bending speed | deg/s | 180 | 120 | 180 |
| Material Feeding speed | mm/sec | 1200 | 1200 | 1200 |
| Rotate speed | deg/s | 360 | 220 | 360 |
| Total power | kw | 7 | 11 | 15 |
| Air resource | Mpa | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 |
| Power | v/Hz | 380/50 | 380/50 | 380/50 |
| Solenoid valve voltage | V | 24 | 24 | 24 |
Advantages:
1. Low cost for operator training,high production effeciency and product uniformity.
2. Drived by electric servo motors.compared with hydraulic drive,it has higher stability and longer lifetime.It is unnecessary to worry about oil-leak or working temperature.
3. Gapless tube bending,with long-time high precision and processing efficiency,easy for operation.It has good compatibility.
4. Small in size,low noise level
5. Low running cost,with best cost performance for tube processing.
6. Widely used in small-diameter tube processing,for example tubes of air conditioner and oil tube for autos
Standard models:1~5 stacks,4~6 servo motors
Advanced motor:11 fully electric servo motors
Applications:
Auto,motorbike,aircraft,bicycle,kids bike,fitness equipment,furniture,outdoor equipment,air conditioner,food machinery,nulcear tube such as reactor,evaporator and heat exchanger
Features
1. An automatic error-fault detecting function is provided,and the errors and faults are displayed on the screen,so that the operator can much easily troubleshoot.
2. Automatic 3D simulation function for detecting interferring position is selected as required.
3. All processing data are inputted by the touch screen
4. Based on the change of materials,each curve is set with a compensation value,a speed and a demoulding gap.
5. Each curve of one tube can be programmed with five action sequences and ten-stage speeds,so that the processing efficiency is improved,and the interference point is reduced.
6. Chinese/English language are switched to display on the touch screen,and customers can also purchase the machine installed with other languages
7. The feeding mode comprises the clamping feeding mode or the direct feeding mode which is selected as required.
8. The X.Y.Z coordinate can be automatically switched into the Y.B.C processing values
9. After the data are compiled,the data is protected by a key,so that the data are prevented from any modification.
10. The Mitsubishi ultra-large CPU can accommodate 400 groups of files for compiling,if necessary,the additional transmission software is bought and installed in the computer,and the documents and files are stored in the hard disk,so that the number of compiling groups is unlimitedly expanded.